Save today on our selection of new and pre-owned lab equipment!

Pre-Owned Thermo Scientific™ Heraguard™ ECO Clean Bench

In stock
Financing By 

Protect samples with the Thermo Scientific™ Heraguard™ ECO Clean Bench, which features optimal efficiency, safety, and functionality. Available with dual DC motors for low energy consumption.

This item is pre-owned and in working condition

Includes vinyl cover (pictured)

Width (English) Interior 23 in.
Width (Metric) Interior 1820 mm
Depth (English) Interior 23 in.
Depth (Metric) Interior 585 mm
Height (English) Interior 25.4 in.
Height (Metric) Interior 645 mm
Width (English) Exterior 74.8 in.
Width (Metric) Exterior 1900 mm
Height (English) Exterior 46.1 in.
Height (Metric) Exterior 1170 mm
Length (English) Exterior 31.9 in.
Voltage 120V
Hertz 60Hz
Noise Level < 55 dBA
Prefilter Type (EN 779), G 3 dust filter, filtering efficiency: coarse medium
Net Weight (English) 355 lb.
Power Consumption 1120W
Air Velocity 89 ft/min. 20% (Standard); 45 ft/min. 20% (Reduced)
Certifications/Compliance CAN/CSA-C22.2 No. 61010-1; UL Std. No. 61010-1; IEC 61010-1
Model ECO 1.8
Description Heraguard ECO 1.8, 6ft width, stainless-steel worksurface w/UV option
Length (English) Shipping 38.6 in.
Width (English) Shipping 79.9 in.
Height (English) Shipping 52.0 in.
Heat Output 1930 BTU/hr.
Weight (English) Shipping 440 lb.
Load Bearing Capacity 66 lbs.
Protection Class I
Overvoltage Category II
Min. Clearance 150mm
Window Material Tempered safety glass
Receptacles 2
Service Valves Up to 2 may be installed through access ports (1 left, 1 right)
IP Rating IP 20
Agency Approvals CSA
Electrical Requirements 120V 60Hz
Lighting 93 fc
Filter Type Type (EN 779), G 3 Dust Filter
Material Stainless-steel worksurface
Type ECO Clean Bench


Please do your research before purchasing. Take advantage of the information provided on our product pages, check specifications, verify application with the manufacturer or communicate with our sales or technical staff for more information. We do not accept returns for incorrectly ordered instruments. Please be sure equipment you are purchasing fits your needs.


Inspect your shipment before accepting the delivery and signing any carrier paperwork. It is important to check your equipment for any damage before accepting and signing for delivery. If there is damage to the shipment, refuse it and note the damage on the Bill of Lading or notify UPS/Fedex driver so he may enter the reason for the refusal into the shipment notes.

Please call or email us within 48 hours of receipt, and we will issue a returned goods authorization (RGA) number for the refused shipment. If damage issues arise after signing for the delivery and without first noting the damage on the Bill of Lading or notifying the driver, you will be responsible for filing all claims with the carrier. Therefore, a thorough and immediate inspection of all shipments is a major step before signing for and accepting delivery.


If a reported issue cannot be resolved, you may return your instrument within 30 days. Depending on the item we reserve the right to assess 20% restocking fee. We do not accept returns on any customized items. Upon receipt back, the equipment will be thoroughly inspected, tested and checked for improper use or mishandling. We reserve the right to refuse returns on any items that were not handled or used properly.