Laboratory High Vacuum Pump

Quick Overview

Laboratory High Vacuum Pump

Availability: In stock

Product Name Price Qty
High Vacuum Pump, 10cfm, 110V, 60Hz
$1,235.04
High Vacuum Pump, 7cfm, 110V, 60Hz
$943.56
High Vacuum Pump, 5cfm, 110V, 60Hz
$873.30
Vacuum Pump 110V w / Gauge
$817.16
VACUUM PUMP, 1/3 HP, 110V
$733.03
"The Tank" Oil Change System
$72.83
High Vacuum Pump Exhaust Filter
$59.72
Pack of 2 quart bottles of high vacuum pump oil.
$46.44
High Vacuum Pump, 10cfm, 110V/220V, 60Hz/50Hz, comes preset at 220V with US 220V plug
$1,246.21
High Vacuum Pump, 7cfm, 110V/220V, 60Hz/50Hz, comes preset at 220V with US 220V plug
$965.68
High Vacuum Pump, 5cfm, 110V/220V, 60Hz/50Hz, comes preset at 220V with US 220V plug
$895.07
Vacuum Pump 220V w / Gauge
$840.18
VACUUM PUMP, 1/2 HP, 220V
$759.05
High Vacuum Grease, 4oz
$40.91
Case of 12 quart bottles of high vacuum pump oil.
$121.22
High Vacuum Tubing, 5ft. Tubing with 2ea. hose clamps, 1/2"ID
$25.18
Request a Quote

Additional Information

SKU sc-37

Details

Two Stage: Produces 1-micron ultimate Pressure
                        
Rotary Sliding Vane: Provides 85 liter per minute (3cfm) capacity and operates quietly

Direct Drive: Reduces space needed

Gas Ballast: Helps purge moisture from vacuum system         

Trap:     Reduces risk of oil sucked back into the system

This direct drive pump provides the best Performance/Cost Ratio available today. Comes complete with initial supply of High Vacuum Pump Oil.  Ready to Operate

Our reliable, rotary vane type, low cost two-stage high vacuum pump operates quietly. Available in 3cfm (cubic feet per minute), 5cfm, 7cfm, 10cfm. All pumps are also available in 220V. The motor is ½ horepower and features 1725 RPM.  The hose barb is 3/8” OD for 3/8” ID tubing on the 3cfm and 5cfm models and 1/2” OD for 1/2” ID tubing on the 7cfm and 10cfm. Operating temperature is 30º F to 170ºF.  Ideal for use with vacuum ovens, bell jars, desiccators, and many more applications. Pumps achieve an ultimate vacuum of 25 microns in laboratory conditions.

Tubing with 2ea. hose clamps, 1/2"ID.  For use with all Fischer Technical "LAV" series high vacuum pumps.

High Vacuum Pump Oil
Designed specifically for use with Fischer Technical  Company High Vacuum Pumps.  This non-detergent high vacuum pump oil is hydro processed to attain its stable, viscous and refined properties.  This process also results in a clear mineral oil that will alert of contamination sooner if the oil becomes milky or cloudy.

High Vacuum Grease
This vacuum grease helps provide a proper seal between the vacuum pump plate and the bell jar so that high vacuum pressures can be achieved.

"The Tank" Oil Change System
All vacuum pumps require changing oil after every use. Contaminated oil, laden with moisture and acid will damage pumps and shorten pump life. On top of that, deep vacuums cannot be achieved with contaminated oil. Maintaining clean oil in your pump will ensure that your pump will operate at peak efficiency. No More Mess & Spills Environmentally Friendly!  The Tank is Easy to Use: Turn black cap counterclockwise to open. Place vacuum pump in the cradle and drain pump. Once the pump has finished draining, turn the black cap clockwise to close after every use. Holds up to 5 oil changes.


Free Air Displacement:85 LPM (3.0 CFM)
Ultimate Vacuum:1-micron laboratory conditions/better than 25 microns field conditions
Pump Speed:1725 RPM
Oil Capacity:27oz. (785cc)
Operating Temperature:30 to 170°F
Vacuum Tubing Required:3/8” OD for 3/8” ID Tubing
Dimensions (W x L x H in.):11” H x 14” L x 5 ¼” W (27.5cm x 35CM x 12.5cm)
Weight:30 lbs.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.